Tempurpedic Active Breeze Review

In This Review
Performance Tests | Firmness | Support & Sleeping Positions | Design | Materials | Comparisons | FAQs

At NapLab, we put each mattress to the test.

We test 10 different factors that impact the performance, comfort, and feel of the mattress. We then take the results of those tests and compare them to every mattress we’ve tested to date.

Check out the full performance table below to see how this mattress ranks:

Factor	Tempurpedic Active Breeze	Average
Overall Score	8.74	8.54
Price (Queen)	$10,598	$2,475 (Specialty only)
Cooling – Score	10	8.6
Sinkage – Depth	2.09″	2.26″
Sinkage – Feel	Moderate	Moderate
Motion Transfer – Score	9.6	8.2
Motion Transfer – Acceleration	5.79 m/s²	8.83 m/s²
Response Time – Score	5.4	8.7
Response Time – Mostly Recovered	1.0 sec.	0.4 sec.
Response Time – Fully Recovered	1.6 sec.	1.0 sec.
Bounce – Height	5.19″	8.60″
Bounce – Feel	Very Low	Moderate
Edge Support – Score	9.2	8.8
Edge Support – Sitting	3.50″	3.82″
Edge Support – Lying	Excellent	Good
Sex – Score	7.1	8.2
Pressure Relief – Score	10	8.6
Comfort Layer Thickness	4.50″	4.38″
Mattress Thickness	13.00″	12.36″
Off-Gassing – Score	9.7	7.9
Off-Gassing – Smell	Strong	Strong
Off-Gassing – Days	1 day	8 days
Company – Score	6.4	9.0
Trial	90 nights	240 nights
Warranty	10 years	40% have lifetime warranties, average of other 60% of mattresses is 13 years

How is Tempurpedic Active Breeze Different?

The Tempurpedic Active Breeze is a 13.00″ specialty mattress with an overall performance level that is slightly better than average but with a price that is significantly higher than average. This mattress is over $9,000 more than the average mattress we’ve tested (comparing 470+ mattresses to date).

Advantages

Despite the high price, there are a number of real advantages with the Active Breeze. Advantages include better cooling performance, lower levels of motion transfer, better pressure relief, better edge support than average, and faster off-gassing.

These advantages cover five out of the eight performance categories that we test for.

Additionally, an advantage that isn’t fully captured by our scoring metric is the active heating and cooling technology in this mattress, as well as the other smart features built into the base.

Sleepers can choose between three cooling intensities and two operating modes. Temp-Curve automatically adjusts airflow throughout the night, while Constant Mode maintains a consistent cooling setting for up to 10 hours.

The system also features active bed warming for up to 60 minutes, along with dual-zone climate controls that allow each sleeper to customize their side independently.

Tempurpedic advertises a temperature range of up to 30°F between its maximum cooling and warming conditions.

Neutral Factors

Neutral factors include moderate levels of sinkage and very low levels of bounce. Low bounce is typical for most traditional Tempurpedic mattresses, which rely on a dramatic hug and an exacting feel.

If you enjoy that type of feel from your mattress, this could be a big advantage. But if you often feel “stuck” in a mattress, then the Active Breeze may not be the right feel for you.

Disadvantages

The biggest disadvantages of the Tempurpedic Active Breeze mattress include an extremely slow material response time, a below-average sex score (due to low bounce), and some red flags within the company score as well.

The Active Breeze has a relatively short, 90-night trial period, a relatively short 10-year warranty, and a $175 return fee if you end up not loving the mattress and want to send it back.

The price is also a huge disadvantage that is difficult to ignore if you’re comparing it to other mattresses without the ProSmart base.

The Tempurpedic Active Breeze has outstanding cooling. During our tests, I did not experience any significant level of heat retention around my body.

This mattress is absolutely packed with material and design choices that greatly improve cooling performance. First up with the biggest impact, there are two large fans built into the base.

Those fans connect to the mattress through two flexible tubes, which bring that airflow directly into the coil layer of the mattress. This brings an incredible level of airflow into the mattress, and it’s fresh, cooler air that’s constantly cycling, forcing any retained warmer air out of the mattress.

• Baseline Temperature – the temperature of the mattress before anyone lies on it
• Maximum Temperature (0 minute) – the temperature of the mattress after lying on it for 15 minutes
• Ending Temperature (5 minute) – the temperature of the mattress after being lied upon and having no one on it for 5 minutes

In addition, this mattress is equipped with a specialized cooling cover that creates a cool-to-the-touch feel on the surface of the mattress. The mattress maintained a cool feel for the duration of our tests. Lastly, we have the hybrid design itself, which also brings more air into the mattress.

In our objective temperature tests, we measured a max surface level temperature of 89.6° F. This is 0.7° cooler than the average of 90.3° F, based on all of our tests to date.

After getting off the mattress, the temperature declined by 3.0 degrees from minutes 0 to 1, which is 1.8 degrees less cool than the average 0 to 1 minute decline of 4.8 degrees.

When we consider the combination of objective data, my subjective experiences, and an analysis of the materials, I’m confident in my view that cooling is outstanding.

The Tempurpedic Active Breeze has moderate sinkage. During our tests, we measured a pressure point sinkage depth of 2.09″. This is 0.17″ less sinkage than the average sinkage depth of 2.26″, based on all of our tests to date.

The level of sinkage is documented in the image below.

The mattress creates a dramatic body-contouring hug. The Active Breeze has a classic memory foam feel with lots of hug, lots of contour, and incredible pressure relief. Tempurpedic uses specialized memory foam that creates an exacting hug around the precise shape of your body.

This feel helps to evenly distribute the body’s weight and deliver fantastic comfort. While the mattress created a moderate sinkage depth for our medicine ball test, I did also note that heavier parts of my body sank deeper into the mattress.

My butt and midsection in particular sank further down, while lighter parts of my body (arms, legs, feet) sank to a more moderate sinkage depth.

The Tempurpedic Active Breeze has a very low level of motion transfer. During our tests, we measured a total acceleration range of 5.79 m/s². This is 34% less motion transfer than the average of 8.83 m/s².

The lower motion transfer is a result of the thick memory foam comfort layers. Memory foam greatly absorbs and disperses energy, meaning bounce is significantly reduced on the mattress.

The level of motion transfer is also documented in the video below.

In our motion transfer chart, which visualizes our accelerometer data, we can see the highest motion peaks from 0 to 0.25 seconds. Motion begins to decline thereafter, but it is a more gradual decline.

By 1.58 seconds, we’ve returned to near-zero levels of energy, which is 0.66 seconds longer than the average motion duration of 0.92 seconds.

Given how low the motion transfer intensity is, I was quite surprised by the relatively long motion duration. That being said, while a longer motion duration certainly isn’t ideal, it’s also not something that I’m worried about in this case.

The Tempurpedic Active Breeze has an incredibly low level of motion intensity, and I expect this level of motion transfer will be more than satisfactory for most sleepers.

The Tempurpedic Active Breeze has a very slow mostly recovered response time and a slow fully recovered response time.

In our mostly recovered test, we measured a recovery speed of 1.0 seconds, which is 0.58 seconds slower than the average of 0.42 seconds, based on all of our tests to date.

In our fully recovered responsiveness test, we measured a recovery speed of 1.6 seconds, which is 0.57 seconds slower than the average of 1.03 seconds. The slower material recovery speed is exactly what we expect from this type of memory foam. Tempurpedic, by design, uses high-density memory foam with a slow material recovery speed.

The level of responsiveness is documented in the video below.

From Tempurpedic’s perspective, this slow response is good because it’s part of the reason why the mattress feels the way it does, especially with respect to low motion transfer, body-contouring hug, and pressure relief.

While I do agree that the slower material recovery speed is a positive factor in those respects, it’s also fair to say that a slower responsiveness makes the mattress harder to move around on. In addition, it negatively inhibits sex performance and can create a “stuck” sensation for some sleepers.

The Tempurpedic Active Breeze has a very low level of bounce. During our tests, we measured a total bounce height of 5.19″. This is 3.41″ less bounce than the average of 8.60″, based on all of our tests to date.

The lower bounce is a result of the memory foam design. Memory foam greatly absorbs and disperses energy. As a result, there is less energy that can be returned to the surface of the mattress as bounce. A lower level of bounce is a major reason why motion transfer is so incredibly low.

The level of bounce is also documented in the video below.

That said, the lower bounce does negatively impact ease of movement on the mattress, as well as negatively impacting sex performance. As a result, there are pros and cons worth considering.

The Tempurpedic Active Breeze has excellent sitting edge support and excellent lying edge support.

In our sitting edge support test, we measured a sitting sinkage compression of 3.50″. This is 0.32″ less sitting sinkage than the average of 3.82″, based on all of our tests to date.

The level of edge support while seated is documented in the images below.

While lying directly on the edge of the mattress, I felt that the support was excellent in all sleeping positions. The Active Breeze is equipped with reinforced support foam running along the entire perimeter of the mattress. Said foam has a sizable positive impact on edge support for both sitting and lying.

Often, memory foam mattresses can struggle more with edge support, as the body-contouring of memory foam can weaken the supportive feel at the edge.

The level of edge support while lying is documented in the images below.

That said, that wasn’t the case here. The Active Breeze hybrid design, good quality materials, and especially the reinforced perimeter edge foam help it to create strong edge support performance.

The Tempurpedic Active Breeze has fair sex performance. On the positive side, this mattress earned outstanding scores in 3 of our 5 testing categories, including noise, pressure relief, and cooling. The mattress is quiet and incredibly comfortable.

In addition, the Active Breeze earned an excellent score for edge support. In our edge tests, we measured a sitting sinkage compression of 3.50”, which is notably better than average. A more robust edge helps extend the usable surface area of the mattress, which is beneficial for amorous activities.

Sex Factor	Factor Weight	Score	Rating
Bounce	65%	5.7	Very Low
Edge Support	20%	9.4	Excellent
Noise	5%	10	Minimal
Pressure Relief	5%	10	Outstanding
Cooling	5%	10	Outstanding

Lastly, we need to talk about the one big negative: bounce. In our bounce tests, we measured a bounce height of 5.19”, which is considerably less bounce than average. A lower level of bounce makes sex more tiring, more strenuous, and less fun.

Unfortunately, one of the primary drawbacks of memory foam is worse sex performance, which almost always stems from a lack of bounce. To be fair, this isn’t a problem with Tempurpedic specifically, but rather a challenge with most memory foam mattresses.

If you want a memory foam mattress, you should be prepared for it to be less-than-great for sex.

The Tempurpedic Active Breeze has an outstanding level of pressure relief. During our tests, I felt no significant pressure points on my body. Quite the contrary, this mattress is able to deliver incredible comfort.

The mattress is equipped with 4.5″ of comfort material, which is 0.12″ more comfort material than the average comfort layer thickness of 4.38″, based on all of our tests to date.

The Active Breeze uses Tempurpedic’s proprietary memory foam, which is incredibly dense and incredibly high-performance. Those foams create an exact, dramatic, and precise hug around the body. That hug alleviates pressure and creates evenly distributed weight across the body.

Notably, the Active Breeze uses a thin, non-quilted cover. That cover, in addition to creating fantastic cooling, creates a more direct and pronounced feeling and contact with the memory foam layers below. In my view, it’s a notable reason why this mattress delivers such an impressive pressure-relieving feel around the body.

When I consider our objective pressure mapping tests, material thickness, material quality, and my subjective experience on the mattress, I’m confident most sleepers will find the pressure relief to be outstanding.

The Tempurpedic Active Breeze had a strong smell upon the initial arrival. The mattress smelled for 1 day. This is 6.6 days shorter than the average smell duration of 7.6 days.

Notably, this mattress arrived uncompressed, but bagged. In my view, that is likely part of the reason why there was so little smell. Since the mattress is never compressed in a box, it has plenty of time to lose its smell before it arrives at your door.

Tempurpedic mattresses come with a 90-night trial period and a 10-year warranty. Shipping is free, but it’ll cost $175 to return it.

Return fees are fairly uncommon, with only 18% of mattresses we’ve tested charging a return fee. Of those brands that do charge a return fee, Tempurpedic is tied for the most expensive at $175.

Company Factor	Factor Weight	Score	Data
Returns	40%	5.0	$175
Trial Period	30%	6.0	90 nights
Warranty	20%	8.0	10 years
Shipping	10%	10	$0
Country of Origin	0%		USA

Tempurpedic’s website says that they “typically” ship in 7-10 days, but due to high demand, shipping can take 3-5 weeks “depending on product selection”.

Comparing 121+ brands tested to date, the average trial period is 240 nights, 128 nights more than Tempurpedic offers. The average warranty is 13 years, which is 3 years more than Tempurpedic offers. Additionally, this excludes the 43% of mattresses that offer lifetime warranties.

The Tempurpedic Active Breeze is only available in a single firmness option “Medium Hybrid”. This is a medium-firm feel that we’d rate as a 6 out of 10 on the firmness scale, where 10 is the most firm.

While many of the mid-tier Tempurpedic models offer multiple options (e.g., soft, medium, firm), the Active Breeze is likely limited by the design of its unique cooling system. Fortunately, the medium-firm feel is the most suitable firmness option for the majority of sleepers and sleeping positions.

Support on the Tempurpedic Active Breeze is outstanding. During our tests, I felt well supported in all sleeping positions. The mattress is equipped with an 8.5″ support layer. This is 0.52″ thicker than the average support layer thickness of 7.98″, based on all of our tests to date.

Support Factor	Data
Comfort Layer	4.50″
Support Layer	8.50″
Firmness	Medium-Firm
Body Contour	Dramatic
Zoned Support	No
Reinforced Edge	Yes

The best support comes from mattresses that evenly support the body, create neutral spinal alignment, and deliver fantastic pressure relief. The Active Breeze meets all of those support requirements without any issues.

This mattress is available in a single firmness, which we rated as a medium-firm feel. That’s a 6 out of 10 on our firmness scale, where 10 is the most firm. This firmness works well for all sleeping positions and is appropriate for the vast majority of sleepers.

Check out the table below to see the sleeper weights and sleeping positions that would be best suited for this mattress.

Sleeper Weight	Stomach Sleeper	Side Sleeper	Back Sleeper
Under 150 lbs.	Yes	Yes	Yes
150-250 lbs.	Yes	Yes	Yes
250-300 lbs.	Yes	Yes	Yes

In all mattress tests, we cut the mattress open to assess and measure the material quality. In doing so, I’m generally pleased with what we measured.

The memory foams measured between 2.76 PCF (pounds per cubic foot) and 4.43 PCF. The 2.76 PCF memory foam is a little south of what I want to see, but also not atypical for a topmost layer that’s designed to be a little softer. The 4.43 PCF memory foam is well within the “excellent” quality tier that I look for.

The poly foam in the core of the mattress measured in at 1.39 PCF, which is far from ideal. Even so, it’s only 0.5” of foam and it’s far away from sleeper bodies, so it’s less problematic. Lastly, the coil gauge measured at 17.0. That coil gauge is quite a bit thinner than is ideal.

Even so, it’s a relatively thin layer at just 2.50” and is designed more as an air gap layer, with the bulk of the support coming from the 6.0” of support foam on the base. Certainly, there are some layers that I’d like to see changed a bit and yet, it’s hard to complain too much.

When we consider the combined performance that this design and these materials are able to deliver, I can understand the choices that Tempurpedic designers made and why.

We’ll be running this mattress through our mattress durability tests soon. So be sure to check out that data set when it goes live. Based on all of my tests to date, an analysis of the materials, and my subjective experiences, I’m confident most sleepers will find support on the Tempurpedic Active Breeze is outstanding.

The Tempurpedic Active Breeze is a 13.00″ specialty mattress that comes in a single firmness option—Medium-Firm. It is designed as a top-tier, luxury mattress that offers the best performance and most impressive features within the entire Tempurpedic lineup.

Design Factor	Data
Type	Specialty
Thickness	13.00″
Cover Type	Thin
Weight	108 lbs.
Has Handles	No
Fiberglass-Free	Yes
Ships in a Box	No

The Active Breeze mattress is the only current Tempurpedic model that offers active heating and cooling with personalized climate control. The cooling vents designed into the base of this mattress are unique to the Active Breeze model and help it to stand out.

TEMPUR-Ergo ProSmart Base

Just as important as the mattress itself, the accompanying smart base is a huge part of the Active Breeze experience. It functions as the mattress foundation and hosts a wide array of luxury features, including:

• Cooling and heating via air conditioning (only compatible with the Tempurpedic Active Breeze mattress)
• Adjustable leg, head, and lumbar
• A sound bar to connect your phone via Bluetooth (can play music or other audio)
• Lights that appear at the bottom of the frame for nighttime walking
• Vibration massage at variable amounts
• USB ports for charging
• App connectivity that enables
  • Sleep tracking
  • Vibration alarms
  • Warm air alarms
  • Soundscape and vibration experiences
  • AI sleep coaching
  • Automatic snore responses

You can buy the Tempurpedic ProSmart Base separately to use with any mattress. There are four tiers that offer increasing features, up to the full list above. However, only purchasing the Tempurpedic Active Breeze will include the fan cooling system. If purchased separately, the ProSmart Base will not have these fans.

The adjustable frame is solid and measures about 3.50” (slightly taller) without the legs attached. The legs have variable height with 4 different sections. The variable legs let you make the mattress substantially shorter or taller, based on your preferences.

The design seems solid and able to provide complete support across the mattress.

Notably, we did not test each smart feature as comprehensively as the rest of the mattress. The temperature control does not have as immediate an effect as the water cooling system used by Eight Sleep or Chilipad. However, it aims to regulate the temperature over the entire sleeping period.

Note: Our images show the ProSmart Base atop our regular mattress platform frame. This was a space-saving measure due to our limited studio size and not the intended use of the base.

The Tempurpedic Active Breeze is 13.00″ thick and contains a combination of different comfort foams, a pocketed coil core, and a support foam base. From top to bottom, here is a full list of the materials used in this mattress:

Layer Type	Thickness	Manufacturer’s Specs	Tested Specs
Memory Foam	3.00″	Not Available	2.76 PCF
Memory Foam	1.00″	Not Available	4.43 PCF
Poly Foam	0.50″	Not Available	1.39 PCF
Pocketed Coils (Interior), Poly Foam (Edge)	2.50″	Not Available	17 Gauge (Interior), 1.32 PCF (Edge)
Support Foam	6.00″	Not Available	1.52 PCF

The Tempurpedic Active Breeze has a proprietary SmartClimate Air cover. It is relatively thin and designed to partner with the cooling features of this mattress.

It has a cool-to-the-touch feel and is also removable. You can wash this cover in a standard washing machine in cold water and Tempurpedic recommends cool or low-heat drying.

The comfort layer is 4.50″ thick and includes three foam layers. Directly below the cover is a 3.00″ memory foam top layer, followed by a 1.00″ memory foam second layer. Below that is a 0.50″ poly foam, which transitions into the support layer below.

This 4.5″ comfort layer is slightly thicker than the average comfort layer (4.38″), which does help contribute to this mattress’s exceptional pressure relief.

The support layer is 8.50″ thick and made of a 2.50″ pocket of coil core followed by a 6.00″ support foam base layer.

This mattress includes over 1,000+ pocketed coils (17 gauge) sandwiched between foam layers.

Product Evolution

The Tempurpedic Active Breeze mattress was originally launched in 2019 and received an update in 2024.

The original version did still include the Active Breeze technology with ventilated materials and powered fans to circulate air through the mattress.

In 2024, Tempurpedic introduced the ProSmart Air adjustable base. This base provided dual-zone heating and cooling and full sleep tracking using AI integration. With these changes, the Active Breeze was positioned as Tempurpedic’s flagship climate control system.

Other Mattresses to Consider

Not sure if the Tempurpedic Active Breeze is the right pick for you? Check out these three other top-rated specialty mattresses for alternatives you may want to consider.

Frequently Asked Questions

Still have questions? Check out some of the top FAQs on the Tempurpedic Active Breeze mattress below and get the answers you’re looking for.