Leesa Sapira Hybrid Review

COUPON – Save $50 on any Leesa with code NAPLAB50.

In This Review
Performance Tests | Firmness | Support & Sleeping Positions | Design | Materials | Comparisons | FAQs

At NapLab, we put each mattress to the test.

We test 10 different factors that impact the performance, comfort, and feel of the mattress. We then take the results of those tests and compare them to every mattress we’ve tested to date.

Check out the full performance table below to see how this mattress ranks:

Factor	Leesa Sapira	Average
Overall Score	9.27	8.52
Price (Queen)	$1,599	$1,518 (Hybrid only)
Cooling – Score	10	8.6
Sinkage – Depth	2.37″	2.25″
Sinkage – Feel	Deep	Moderate
Motion Transfer – Score	9.6	8.2
Motion Transfer – Acceleration	5.90 m/s²	8.80 m/s²
Response Time – Score	7.9	8.7
Response Time – Mostly Recovered	0.5 sec.	0.4 sec.
Response Time – Fully Recovered	1.2 sec.	1.0 sec.
Bounce – Height	8.33″	8.65″
Bounce – Feel	Moderate	Moderate
Edge Support – Score	8.9	8.7
Edge Support – Sitting	4.00″	3.85″
Edge Support – Lying	Excellent	Good
Sex – Score	8.3	8.2
Pressure Relief – Score	10	8.6
Comfort Layer Thickness	4.00″	4.38″
Mattress Thickness	11.00″	12.36″
Off-Gassing – Score	7.5	7.9
Off-Gassing – Smell	Strong	Strong
Off-Gassing – Days	9 days	8 days
Company – Score	9.4	8.8
Trial	120 nights	196 nights
Warranty	Lifetime	41% have lifetime warranties, average of other 59% of mattresses is 14 years

How is Leesa Sapira Different?

The Leesa Sapira is a 11.00″ hybrid mattress with an overall performance level that is significantly higher than average and a price that is also higher than average. But the difference in price between the average hybrid and the Sapira is less than $100 (5% difference).

Advantages

The Sapira has exceptional cooling performance and less motion transfer than average. Edge support is also impressive, with notably less sinkage when sitting or lying at or near the edge of the mattress.

Sex performance is just slightly better than average, and pressure relief is significantly better than average.

This mattress only has a 4.0″ comfort layer and the overall thickness is also a bit thinner than average (1.36″ thinner). Despite the thinner materials, pressure relief is fantastic and scores a 10/10 in our tests.

Neutral Factors

The Sapira has deeper sinkage than the average mattress and moderate levels of bounce. Both bounce and sinkage are considered neutral factors as different sleepers will have different preferences in these areas.

Disadvantages

The biggest disadvantages of the Sapira are slower material response time and slower off-gassing. All other factors score consistently higher than the average mattress.

The Leesa Sapira has outstanding cooling. During our tests, I did not experience any significant level of heat retention around my body.

This mattress has a number of different materials and design elements that aid in cooling. First up, we have a thin, non-quilted cover. This cover design is highly breathable and allows air to easily flow in and out of the mattress.

In addition, we have the hybrid design itself, which also brings more airflow into the mattress.

• Baseline Temperature – the temperature of the mattress before anyone lies on it
• Maximum Temperature (0 minute) – the temperature of the mattress after lying on it for 15 minutes
• Ending Temperature (5 minute) – the temperature of the mattress after being lied upon and having no one on it for 5 minutes

Lastly, we have poly foams that seem to do a good job at mitigating buildup. Leesa recently redesigned the Sapira with a new plant-based foam. Said foam is perforated with holes and also has a more open-cell structure, both of which improve breathability and reduce heat retention.

In our objective temperature tests, we measured a max surface level temperature of 90.3° F. This is the same as the average temperature of 90.3° F, based on all of our tests to date.

After getting off the mattress, the temperature declined by 3.8 degrees from minutes 0 to 1, which is 1.0 degree less cool than the average 0 to 1 minute decline of 4.8 degrees.

When we consider the combination of objective data, my subjective experiences, and an analysis of the materials, I’m confident in my view that cooling is outstanding.

The Leesa Sapira has deep sinkage. During our tests, we measured a pressure point sinkage depth of 2.37″. This is 0.12″ more sinkage than the average sinkage depth of 2.25″, based on all of our tests to date.

The level of sinkage is documented in the image below.

The mattress creates a balanced body contouring hug. The thin, non-quilted cover means the body is in greater contact with the foam layers below. The mix of Leesa’s new plant-based poly foam, memory foam, and poly foam creates a blended and balanced feel around the body.

There is a notable hug, but it’s not excessive or restrictive like many memory mattresses can be. The hugging feel creates fantastic comfort and pressure relief. In my view, this type of body contouring hug is one that most sleepers will enjoy.

The Leesa Sapira has a very low level of motion transfer. During our tests, we measured a total acceleration range of 5.90 m/s². This is 33% less motion transfer than the average of 8.80 m/s².

The lower motion is a product of a below-average level of bounce, a thick comfort layer, and a 1.5” memory foam layer. The foams do a nice job of absorbing and dispersing energy, which means there is less energy that can easily transfer across the mattress.

The level of motion transfer is also documented in the video below.

In our motion transfer chart, which visualizes our accelerometer data, we can see the highest motion peaks from 0 to 0.25 seconds.

Motion drops off notably thereafter. By 0.75 seconds, we’ve returned to near-zero levels of energy, which is 0.16 seconds shorter than the average motion duration of 0.91 seconds.

Both motion duration and motion intensity were notably better than average. As a result, the total mattress transfer experience is significantly better than average. I expect most sleepers will find this level of motion transfer to be more than satisfactory.

The Leesa Sapira is a mixed bag for material responsiveness, with a fast mostly recovered response time and a moderate fully recovered response time.

In our mostly recovered test, we measured a recovery speed of 0.5 seconds, which is 0.08 seconds slower than the average of 0.42 seconds, based on all of our tests to date.

In our fully recovered responsiveness test, we measured a recovery speed of 1.2 seconds, which is 0.17 seconds slower than the average of 1.03 seconds. The Sapira uses different types of foams, including memory foam, plant-based poly foam, and regular poly foam, in addition to the spring layer.

The poly foams and spring layer rebound back to shape quickly. However, the 1.5” memory foam layer in the core of the mattress takes a bit longer to fully recover back to its original shape. That layer is slowing down the total material recovery speed on the mattress.

The level of responsiveness is documented in the video below.

The slower responsiveness makes it a bit more difficult to move around on the mattress and also has a negative impact on sex performance. That being said, while responsive performance is worse than average, these material recovery speeds aren’t bad. They just aren’t good either.

The Leesa Sapira has a moderate level of bounce. During our tests, we measured a total bounce height of 8.33″. This is 0.31″ less bounce than the average of 8.64″, based on all of our tests to date.

The lower bounce is resulting from a thinner-than-average 6.5” coil unit, 4.0” foam comfort layer, and a 1.5” memory foam layer in the core. In my view, the memory foam layer in particular is having an outsized impact on bounce.

Memory foam, by its nature, greatly absorbs and disperses energy. That energy absorption means there is less bounce that can be generated by the mattress.

The level of bounce is also documented in the video below.

The lower bounce is a major reason why we see lower motion transfer. However, a lower bounce does negatively impact ease of movement and sex performance. So there are pros and cons you’ll need to consider with respect to bounce.

The Leesa Sapira has good sitting edge support and excellent lying edge support.

In our sitting edge support test, we measured a sitting sinkage compression of 4.00″. This is 0.14″ more sitting sinkage than the average of 3.86″, based on all of our tests to date.

The level of edge support while seated is documented in the images below.

While lying directly on the edge of the mattress, I felt that the support was excellent in all sleeping positions. This mattress is equipped with reinforced coils running along the left and right sides of the mattress. These coils are certainly making a positive impact.

That said, it’s also clear that edge support has room for improvement. When we cut the mattress open to examine the material quality, we can see that the new plant-based poly foam has a notable curvature at the edge.

The level of edge support while lying is documented in the images below.

In my view, that curving design is creating a weakened support at the edge. To be clear, edge support is still good, nearly great, but certainly having a slightly worse-than-average sinkage compression depth means it could have been better.

The Leesa Sapira has good sex performance. On the positive side, noise is minimal, and both pressure relief and cooling are outstanding. If nothing else, this mattress is comfortable and quiet. In addition, edge support is also good, but it didn’t quite rise to the excellent level.

This mattress has 4.0” of sitting sinkage compression at the edge. That’s a bit worse than average. Even so, it’s still robust enough to allow the edge of the mattress to function well for amorous activities.

Sex Factor	Factor Weight	Score	Rating
Bounce	65%	7.7	Moderate
Edge Support	20%	8.8	Good
Noise	5%	10	Minimal
Pressure Relief	5%	10	Outstanding
Cooling	5%	10	Outstanding

Now, moving on to the negatives, we have just one, but it’s a big one. Bounce measured in at 8.33”. That’s less bounce than average. When it comes to sex, more bounce is almost always better. The lower level of bounce makes sex a bit more strenuous and tiring.

All factors considered, this level of sex performance is still a touch better than average. And yet, it would have certainly been better with a higher level of bounce.

The Leesa Sapira has an outstanding level of pressure relief. During our tests, I felt no significant pressure points on my body.

The mattress is equipped with 4.0″ of comfort material, which is 0.38″ less comfort material than the average comfort layer thickness of 4.38″, based on all of our tests to date.

The Sapira is equipped with a thin, non-quilted cover. This cover type allows the body to create more direct and pronounced engagement with the foam comfort layers below. This comfort layer stack is a blend of plant-based poly foam, memory foam, and traditional poly foam.

These material layers create a blended feel where no one layer overpowers the others. Instead, they work together to create a balanced and even feel that delivers fantastic pressure relief for the body.

The quality of foam layers looks and feels great, both on the body and in-hand (see here for more information on the materials). In our objective pressure mapping tests, we measured a max PSI of 0.72, which is well within the 1.0 PSI threshold we ideally want to see.

Pressure Relief (PSI)	Average	Maximum
Side Sleepers	0.11	0.72

Pressure Relief (PSI)	Average	Maximum
Back Sleepers	0.08	0.70

Pressure Relief (PSI)	Average	Maximum
Stomach Sleepers	0.07	0.33

When I consider our objective pressure mapping tests, material thickness, material quality, and my subjective experience on the mattress, I’m confident most sleepers will find the pressure relief to be outstanding.

The Leesa Sapira had a strong smell upon the initial unboxing. The mattress smelled for 9 days. This is 1.4 days longer than the average smell duration of 7.6 days.

Leesa mattresses come with a 120-night trial period and a lifetime warranty. Shipping and returns are both free.

Company Factor	Factor Weight	Score	Data
Returns	40%	10	$0
Trial Period	30%	8.0	120 nights
Warranty	20%	10	Lifetime
Shipping	10%	10	$0
Country of Origin	0%		USA

Comparing 121+ brands tested to date, the average trial period is 196 nights, 66 nights more than Leesa offers.

Despite the shorter trial period, Leesa is backed by a lifetime warranty, a nice perk offered by only 41% of the mattresses we’ve tested. The average warranty of the other 59% of mattresses is 14 years.

The Leesa Sapira comes in only one firmness option, which they describe as “medium to medium-firm.” I agree with this firmness description.

Based on my personal experience, I believe this mattress has a medium-firm feel with a 6 out of 10 rating, where 10 is the most firm.

A medium-firm feel works well for all sleeping positions and most sleepers.

Support on the Leesa Sapira is excellent. During our tests, I felt well supported in all sleeping positions.

Support Factor	Data
Comfort Layer	4.00″
Support Layer	7.00″
Firmness	Medium-Firm
Body Contour	Balanced
Zoned Support	No
Reinforced Edge	Yes

The mattress is equipped with a 7.0″ support layer. This is 0.98″ thinner than the average support layer thickness of 7.98″, based on all of our tests to date. Mattresses that create the best support achieve two major requirements.

First, they create a neutral position for the spine and second, they create sufficient comfort and pressure relief. The Sapira meets both of these criteria without any problems.

Moving on, this mattress is available in a single firmness, which we rated as a medium-firm. That’s a 6 out of 10 on our firmness scale, where 10 is the most firm. A medium-firm feel works for all sleeping positions and is a good choice for the vast majority of sleepers.

Check out the table below to see the sleeper weights and sleeping positions that would be best suited for this mattress.

Sleeper Weight	Stomach Sleeper	Side Sleeper	Back Sleeper
Under 150 lbs.	Yes	Yes	Yes
150-250 lbs.	Yes	Yes	Yes
250-300 lbs.	Yes	Yes	Yes

In all mattress tests, we make it a point to cut the mattress open so we can assess the material quality. In doing so, I’m really pleased with what we measured.

The poly foam layers ranged from a density of 1.56 PCF to 4.01 PCF. The 1.56 is on the lower end, but given it’s in the core of the mattress and only 1.0”, it’s less of a concern. That being said, I’m greatly pleased by the density of Leesa’s new plant-based foam, which we measured at 3.02 PCF.

This is on the higher end of the range we hope to see. In addition, the Sapira’s memory foam measured in at 4.01 PCF, which is also well within the good density tier I hope to see. Denser foam are preferable as they typically perform better, last longer, and sag less.

Lastly, the coil thickness measured a 13.5 gauge, which is a fairly thick wire and thicker than what we see on most mattresses. Overall, I’m impressed with the material specs of the Sapira. Said specs give me great confidence in the longevity of this mattress.

Lastly, this mattress does not utilize zone support. Instead, we have a consistent firmness and support from head to foot on the mattress. Based on all of my tests to date, an analysis of the materials, and my subjective experiences, I’m confident most sleepers will find support on the Leesa Sapira is excellent.

The Leesa Sapira is an 11.00″ hybrid mattress that comes in a single firmness option—Medium-Firm.

Design Factor	Data
Type	Hybrid
Thickness	11.00″
Cover Type	Thin
Weight	115 lbs.
Has Handles	No
Fiberglass-Free	Yes
Ships in a Box	Yes

Within the Leesa collection, the Sapira falls in a mid-range tier. It is not as affordable as the Leesa Original Hybrid, but it does offer considerable savings off of the higher-end Leesa hybrids (like the Leesa Legend or Leesa Reserve).

Regarding performance, the Sapira is actually the highest-performing Leesa mattress that we’ve tested to date, making it an attractive option for value-seeking sleepers.

The Leesa Sapira is 11.00″ thick and contains a combination of different foam types as well as a pocketed coil and support foam base. From top to bottom, here is a full list of the materials used in this mattress:

Layer Type	Thickness	Manufacturer’s Specs	Tested Specs
Poly Foam	1.50″	Not Available	3.02 PCF
Memory Foam	1.50″	Not Available	4.01 PCF
Poly Foam	1.00″	Not Available	1.56 PCF
Pocketed Coils	6.50″	Not Available	13.5 Gauge (center), 15.5 Gauge (edge)
Support Foam	0.50″	Not Available	1.34 PCF

The Leesa Sapira has a thin, cool knit cover. It contains viscose fibers, which are designed to be breathable and moisture-wicking.

Leesa uses their classic 4-bar graphic design to provide a striking contrast between the white cover and the gray bars.

The comfort layer is 4.00″ thick and is made up of three different layers of foam. Directly below the cover is a 1.5″ layer of poly foam, which Leesa markets as “GreenFlex Foam”. This foam is an open-cell foam and is made of plant-based materials.

Directly below the GreenFlex foam is a 1.5″ memory foam (gray foam) as well as a 1.0″ poly foam (pink foam).

The support layer is 7.00″ thick and made of a 6.5″ pocketed coil system followed by a 0.5″ support foam base.

Product Evolution

The Leesa Sapira was first introduced in October 2016 and in 2018, it was renamed to be the Leesa Hybrid. This design remained consistent until 2023 when the name went back to be called the Sapira.

We tested this mattress in 2022 and again in 2026. The changes are noted below:

Factor	2021 Version	2026 Version
Overall Score	9.47	9.27
Price (Queen)	$1,599	$1,599
Cooling – Score	10	10
Sinkage – Depth	2.05″	2.37″
Sinkage – Feel	Moderate	Deep
Motion Transfer – Score	10	9.6
Motion Transfer – Acceleration	4.66 m/s²	5.90 m/s²
Response Time – Score	9.5	7.9
Response Time – Mostly Recovered	0.3 sec.	0.5 sec.
Response Time – Fully Recovered	0.4 sec.	1.2 sec.
Bounce – Height	12.67″	8.33″
Bounce – Feel	Very High	Moderate
Edge Support – Score	7.5	8.9
Edge Support – Sitting	6.25″	4.00″
Edge Support – Lying	Excellent	Excellent
Sex – Score	9.1	8.3
Pressure Relief – Score	10	10
Comfort Layer Thickness	4.00″	4.00″
Mattress Thickness	11.00″	11.00″
Off-Gassing – Score	8.3	7.5
Off-Gassing – Smell	Strong	Strong
Off-Gassing – Days	6 days	9 days

Other Mattresses to Consider

Not sure if the Leesa Sapira is the right pick for you? Check out these three other top-rated hybrid mattresses for alternatives you may want to consider.

Frequently Asked Questions

Still have questions? Check out some of the top FAQs on the Leesa Sapira mattress below and get the answers you’re looking for.