
Best For
- Value-price, under $500 for a queen-sized mattress
- Fast material responsiveness
- Less motion transfer than the average level
Considerations
- Cooling is below average with moderate levels of heat retention
- Edge support is lacking when sitting or lying
- Pressure relief is good, but far from great
Our Verdict
The Novilla AiryFlow Graphene Hybrid is a 14.00″ hybrid mattress made of memory foam, poly foam, and a pocketed coil base. It is topped by a quilted cover and euro top accents to give the mattress a luxury look.
The Novilla AiryFlow Graphene Hybrid is available in a single firmness level — medium-firm. On our firmness scale, this is a 6 out of 10, where 10 is the most firm.
This mattress has deep sinkage and moderate levels of bounce. It has a dramatic level of contour, which can be good for sleepers who want more hug.
In our performance tests, this mattress earned an overall score of 8.21, ranking the mattress in the bottom 24% of all mattresses tested to date. When we look exclusively at hybrids, this mattress ranks among the bottom 18%.
The Novilla AiryFlow Graphene Hybrid is $500 for a queen-sized mattress, which is 58% less expensive than the average hybrid. If you’re on a tight budget, this mattress could be a good option, but it ranks below average in many performance categories.
Type: Hybrid
Firmness: Medium-Firm (6)
Best For: All Sleeping Positions, All Body Weights
In This Review
Performance Tests | Firmness | Support & Sleeping Positions | Design | Materials | Comparisons | FAQs
Performance Tests
At NapLab, we put each mattress to the test.
We test 10 different factors that impact the performance, comfort, and feel of the mattress. We then take the results of those tests and compare them to every mattress we’ve tested to date.
Check out the full performance table below to see how this mattress ranks:
| Factor | Novilla AiryFlow Graphene Hybrid | Average |
|---|---|---|
| Overall Score | 8.21 | 8.54 |
| Price (Queen) | $500 | $1,560 (Hybrid only) |
| Cooling – Score | 7.0 | 8.6 |
| Sinkage – Depth | 2.36″ | 2.27″ |
| Sinkage – Feel | Deep | Moderate |
| Motion Transfer – Score | 8.9 | 8.2 |
| Motion Transfer – Acceleration | 7.48 m/s² | 8.80 m/s² |
| Response Time – Score | 9.2 | 8.7 |
| Response Time – Mostly Recovered | 0.3 sec. | 0.4 sec. |
| Response Time – Fully Recovered | 0.7 sec. | 1.0 sec. |
| Bounce – Height | 9.12″ | 8.58″ |
| Bounce – Feel | Moderate | Moderate |
| Edge Support – Score | 8.2 | 8.8 |
| Edge Support – Sitting | 4.25″ | 3.82″ |
| Edge Support – Lying | Good | Good |
| Sex – Score | 8.3 | 8.2 |
| Pressure Relief – Score | 8.0 | 8.6 |
| Comfort Layer Thickness | 4.50″ | 4.39″ |
| Mattress Thickness | 14.00″ | 12.36″ |
| Off-Gassing – Score | 8.1 | 7.9 |
| Off-Gassing – Smell | Strong | Strong |
| Off-Gassing – Days | 7 days | 8 days |
| Company – Score | 9.0 | 9.0 |
| Trial | 100 nights | 243 nights |
| Warranty | 10 years | 40% have lifetime warranties, average of other 60% of mattresses is 13 years |
How is Novilla AiryFlow Graphene Hybrid Different?
The Novilla AiryFlow Graphene Hybrid is a 14.00″ hybrid mattress with an overall performance level that is well below average and a price that is also below average. This results in a cheaper mattress with lower performance, so you’re getting what you pay for in a lot of ways.
Advantages
The AiryFlow Graphene Hybrid offers lower motion transfer, faster material response, and faster off-gassing. The price is also a major advantage if you’re on a tight budget.
Neutral Factors
This mattress has deep levels of sinkage and a moderate level of bounce. It has a dramatic level of body contour and hug when lying on the mattress. Not all sleepers will love this feel, but for some, this can prove to be very comfortable.

Disadvantages
Disadvantages of this mattress include a lower cooling score, weaker edge support, and below-average pressure relief. The trial and warranty are both also a bit shorter than average.
Cooling Test
The Novilla AiryFlow Graphene Hybrid has fair cooling. During our tests, I felt a slight to moderate level of heat retention around my body.
Baseline Temp.
79.8° F
Max. Temp.
92.9° F
Ending Temp.
83.1° F
On the surface, this mattress has a number of materials that are designed to help improve cooling, including “nanogel” particles infused with the memory foam, graphene infused within the cover, and coils to provide greater airflow.
Max. Temp.

Ending Temp.

- Baseline Temperature – the temperature of the mattress before anyone lies on it
- Maximum Temperature (0 minute) – the temperature of the mattress after lying on it for 15 minutes
- Ending Temperature (5 minute) – the temperature of the mattress after being lied upon and having no one on it for 5 minutes
These materials all sound like they should make a notable difference for cooling. However, when we conducted our cooling tests we found that the performance just wasn’t especially good.
In our objective temperature tests, we measured a max surface level temperature of 92.9° F. This is 2.6° warmer than the average of 90.3° F, based on all of our tests to date.
After getting off the mattress, the temperature declined by 6.6 degrees from minutes 0 to 1, which is 1.8 degrees cooler than the average 0 to 1 minute decline of 4.8 degrees.
Heat Dissipation Over Time

When we consider the combination of objective data, my subjective experiences, and an analysis of the materials, I’m confident in my view that cooling is fair.
Sinkage Test
The Novilla AiryFlow Graphene Hybrid has deep sinkage. During our tests, we measured a pressure point sinkage depth of 2.36″. This is 0.10″ more sinkage than the average sinkage depth of 2.26″, based on all of our tests to date.
Sinkage Depth
2.36″
Sinkage Feel
Deep
Body Contour
Dramatic
The level of sinkage is documented in the image below.

The mattress creates a dramatic body-contouring hug. This is despite a more modest sinkage depth. The mattress has a memory foam layer at the top of the comfort layer stack. That memory foam is having a pronounced impact on the feel.
It also creates a dramatic and exacting contouring hug around the precise shape of your body. To be comfortable on the AirFlow Graphene, you’ll want to strongly prefer the feel of a dramatic body-contouring hug and the feel of memory foam.
Motion Transfer Test
The Novilla AiryFlow Graphene Hybrid has a low level of motion transfer. During our tests, we measured a total acceleration range of 7.48 m/s². This is 15% less motion transfer than the average of 8.81 m/s².
Accel. Range
7.48 m/s²
Motion Duration
0.79 seconds
The quilted cover and memory foam layer seem to be doing some serious heavy lifting when it comes to motion transfer. Those layers in particular are greatly absorbing and dispersing energy, thereby reducing motion transfer.
The level of motion transfer is also documented in the video below.
In our motion transfer chart, which visualizes our accelerometer data, we can see the highest motion peaks from 0 to 0.2 seconds. Motion declines dramatically immediately thereafter. That said, we do see a small secondary energy spike from 0.5 to 0.6 seconds.
By 0.79 seconds, we’ve returned to near-zero energy levels, which is 0.13 seconds shorter than the average motion duration of 0.92 seconds. Despite the secondary energy spike, both motion duration and motion intensity measured below average on our acceleration tests.
Motion Transfer Over Time

Overall, I’m pleased with this level of motion transfer and expect most sleepers will find it satisfactory.
Response Test
The Novilla AiryFlow Graphene Hybrid has a very fast mostly recovered response time and a fast fully recovered response time.
Mostly Recovered
0.3 sec.
Fully Recovered
0.7 sec.
In our mostly recovered test, we measured a recovery speed of 0.3 seconds, which is 0.12 seconds faster than the average of 0.42 seconds, based on all of our tests to date.
In our fully recovered responsiveness test, we measured a recovery speed of 0.7 seconds, which is 0.33 seconds faster than the average of 1.03 seconds. While these material recovery speeds aren’t quite instant, they aren’t slow either.
The level of responsiveness is documented in the video below.
Most of the materials within the mattress spring back to shape incredibly quickly. The memory foam layer is slightly slower to recover, but even it still recovers relatively quickly, especially given its pronounced memory foam feel. Faster material recovery creates excellent ease of movement and prevents any stuck feeling.
Overall, I’m pleased with this response level, and I expect most sleepers will find it satisfactory.
Bounce Test
The Novilla AiryFlow Graphene Hybrid has a moderate level of bounce. During our tests, we measured a total bounce height of 9.12″. This is 0.53″ more bounce than the average of 8.59″, based on all of our tests to date.
Max. Depth
5.81″
Max. Rebound
3.31″
Total Bounce
9.12″
The higher-than-average bounce is a product of the taller-than-average 9.50” coil unit and foam layers that are both highly responsive and highly resilient. This combination sets the stage for greater levels of energy to make its way to the surface of the mattress, delivering more bounce.
More bounce typically also means worse motion transfer. However, that’s not what we saw here.
Max. Sinkage Depth

Max. Bounce Height

The level of bounce is also documented in the video below.
The AiryFlow Graphene Hybrid does a nice job at localizing bounce to a small area, as opposed to spreading it across the mattress. A higher level of bounce is beneficial for both ease of movement and sex performance.
Edge Support Test
The Novilla AiryFlow Graphene Hybrid has good sitting edge support and good lying edge support.
Max. Sinkage
4.25″
Lying Support
Good
Reinforced Edge
Yes
In our sitting edge support test, we measured a sitting sinkage compression of 4.25″. This is 0.44″ more sitting sinkage than the average of 3.81″, based on all of our tests to date.
The level of edge support while seated is documented in the images below.
Sitting, 140 lbs.

Sitting, 200 lbs.

While lying directly on the edge of the mattress, I felt that the support was good in all sleeping positions. Notably, this mattress does not use any type of reinforced coils or foam along the edge. It’s this missing reinforcing material that is a notable reason why we see both lying and edge support earning below-average scores.
In addition, the memory foam feel and dramatic body-contouring hug is also having a negative impact on edge support.
The level of edge support while lying is documented in the images below.
Lying on Edge, 140 lbs.

Lying on Edge, 200 lbs.

When along the edge, that significant contour creates a weakening of support, since there isn’t enough material to fully contour to the body and provide adequate support at the edge.
All that to say, this level of edge support isn’t bad. It still earned a good score, even if it’s slightly below average. And yet, for those who strongly prefer a highly robust and supportive edge, this level of performance will likely be disappointing.
Sex Test
The Novilla AiryFlow Graphene Hybrid has good sex performance. The biggest positive on this mattress is simply the minimal noise, which earned a perfect 10/10 score due.
We see 3 of our 5 testing categories earning good scores, but also scores that are far from great. Those factors include bounce, edge support, and pressure relief.

Bounce measured at 9.12”, which is more than average. And yet, when it comes to sex, more bounce is almost always better. A more limited bounce means we have a more limited ease of movement for amorous activities.
In addition, we have edge support, where we measured a sitting sinkage compression of 4.25”. This is worse than average. Edge support is useful for sex because it means we increase the usable surface area of the mattress.
| Sex Factor | Factor Weight | Score | Rating |
|---|---|---|---|
| Bounce | 65% | 8.2 | High |
| Edge Support | 20% | 8.4 | Good |
| Noise | 5% | 10 | Minimal |
| Pressure Relief | 5% | 8.0 | Good |
| Cooling | 5% | 7.0 | Fair |
Lastly, we have cooling, which earned a fair score. That score is notably worse than average. Unfortunately, this mattress just didn’t do great when it comes to cooling.
Overall, we see sex earning a good score, but also one that is far from great. In my view, it’s fair to say that this mattress leaves something to be desired.
Pressure Relief Test
The Novilla AiryFlow Graphene Hybrid has a good level of pressure relief. During our tests, I felt a slight level of pressure point buildup, but it was nothing extreme or discomforting. That being said, it’s clear that the pressure relief on this mattress does not rise to the excellent or outstanding level.
Comfort Layer
4.50″
Support Layer
9.50″
The mattress is equipped with 4.5″ of comfort material, which is 0.12″ more comfort material than the average comfort layer thickness of 4.38″, based on all of our tests to date. While we do have a fairly thick comfort layer, I’m not impressed by the material quality of those foams.
In our foam density tests, we see most foams measuring 1.56 to 1.88 PCF (pounds per cubic foot). While one poly foam layer was denser at 2.84 PCF, it alone isn’t enough to carry the pressure-relieving performance.

Despite the fairly thin 0.5” memory foam layer, this mattress creates a notable body-contouring hug and has a significant memory foam feel. While the mattress definitely has a notable memory foam feel, layers of poly foam below the memory foam do help to balance it out. As such, the body-contouring hug isn’t as dramatic as some memory foam and memory foam hybrids can be.
Even so, you’ll need to strongly prefer a more dramatic hug around the body to be comfortable on this mattress.
When we look at our objective pressure mapping tests, we do see a fairly even weight distribution across the mattress. While lying on my side, I do see greater pressure on my hips and shoulders. And yet, given the price point, I do think this is a reasonable level of pressure relief and comfort.
Pressure Map – Side Sleepers

| Pressure Relief (PSI) | Average | Maximum |
|---|---|---|
| Side Sleepers | 0.26 | 0.84 |
Pressure Map – Back Sleepers

| Pressure Relief (PSI) | Average | Maximum |
|---|---|---|
| Back Sleepers | 0.17 | 0.57 |
Pressure Map – Stomach Sleepers

| Pressure Relief (PSI) | Average | Maximum |
|---|---|---|
| Stomach Sleepers | 0.17 | 0.73 |
When I consider our objective pressure mapping tests, material thickness, material quality, and my subjective experience on the mattress, I’m confident most sleepers will find the pressure relief to be good.
Off-Gassing Test
The Novilla AiryFlow Graphene Hybrid had a strong smell upon the initial unboxing. The mattress smelled for 7 days. This is 0.6 days shorter than the average smell duration of 7.6 days.
Initial Smell Strength
Strong
Off-Gassing Period
7 days

Company
Novilla mattresses come with a 100-night trial period and a 10-year warranty. Shipping and returns are both free.
| Company Factor | Factor Weight | Score | Data |
|---|---|---|---|
| Returns | 40% | 10 | $0 |
| Trial Period | 30% | 8.0 | 100 nights |
| Warranty | 20% | 8.0 | 10 years |
| Shipping | 10% | 10 | $0 |
| Country of Origin | 0% | Indonesia |
Comparing 122+ brands tested to date, the average trial period is 243 nights. By this standard, the Novilla trial period is significantly shorter than average (143 nights shorter).
The average warranty is 13 years, 3 years longer than the Novilla. Additionally, this excludes the 43% of mattresses that offer lifetime warranties.

How firm is Novilla AiryFlow Graphene Hybrid?
The Novilla AiryFlow Graphene Hybrid is available in a single firmness option—medium-firm. This is a rating of 6 out of 10, where 10 is the most firm.

This type of rating is generally suitable for the vast majority of sleepers, as it gives the right amount of pushback for the average body type and each sleeping position.
Support & Sleeping Positions
Support on the Novilla AiryFlow Graphene Hybrid is good. During our tests, I felt well supported in all sleeping positions. That said, it was also clear that support didn’t rise to the excellent or outstanding level.
| Support Factor | Data |
|---|---|
| Comfort Layer | 4.50″ |
| Support Layer | 9.50″ |
| Firmness | Medium-Firm |
| Body Contour | Dramatic |
| Zoned Support | Yes |
| Reinforced Edge | Yes |
The mattress is equipped with a 9.5″ support layer. This is 1.52″ thicker than the average support layer thickness of 7.98″, based on all of our tests to date. Mattresses that create the best support are able to support the body, delivering a neutral spinal alignment, while also creating ample pressure relief and comfort.
In general, this mattress meets those requirements. That said, I think it’s fair to say that pressure relief performance has room for improvement. Nevertheless, given the $500 queen-sized price, it’s hard to complain too much. In my view, this level of support performance is expected and fair at this price.

This mattress is available in a single firmness, medium-firm. That’s a 6 out of 10 on our firmness scale, where 10 is the most firm. This firmness works well for all sleeping positions and most sleepers.
Check out the table below to see the sleeper weights and sleeping positions that would be best suited for this mattress.
| Sleeper Weight | Stomach Sleeper | Side Sleeper | Back Sleeper |
|---|---|---|---|
| Under 150 lbs. | Yes | Yes | Yes |
| 150-250 lbs. | Yes | Yes | Yes |
| 250-300 lbs. | Yes | Yes | Yes |
In all mattress tests, we make it a point to cut the mattress open to measure the material quality. In doing so, we found the poly foams measure between 1.56 PCF (pounds per cubic foot) and 2.84 PCF. Ideally, we want to see poly foam at or above 2.5 PCF, and we see only one of the layers exceeded this level.
The memory foam measured 1.88 PCF, which is well below the 4.0 PCF ideal threshold I want to see. Lower-density foam typically performs worse, sag deeper, and doesn’t last as long. Certainly, these foam layer densities are far from ideal and yet not unexpected.

Given the price point, it makes sense that the manufacturer would choose lower density foams in order to hit the $500 queen-sized price. In addition, we measured the coil gauge at 13.5 gauge at the edge and 15 gauge elsewhere. These are surprisingly thick wires. So no issues there.
Based on all of my tests to date, an analysis of the materials, and my subjective experiences, I’m confident most sleepers will find support on the Novilla AiryFlow Graphene Hybrid to be good.
Design
The Novilla AiryFlow Graphene Hybrid is a 14.00″ hybrid mattress that comes in a single firmness option—Medium-Firm. This mattress is a high-profile option at a budget-friendly price. There are certainly sacrifices that you make in overall performance, but if you want a mattress that looks high-end without spending big cash, this could be a reasonable pick.
| Design Factor | Data |
|---|---|
| Type | Hybrid |
| Thickness | 14.00″ |
| Cover Type | Quilted |
| Weight | 89 lbs. |
| Has Handles | No |
| Fiberglass-Free | Yes |
| Ships in a Box | Yes |
Within the Novilla collection, the AiryFlow Graphene Hybrid is marketed as a cooling-focused hybrid, which is ironic because cooling performance (in our tests) was below average.

That being said, among all Novilla mattresses that I’ve tested to date, the Airyflow Graphene Hybrid is by far the highest-performing option from the brand.
Materials
The Novilla AiryFlow Graphene Hybrid is 14.00″ thick and contains a combination of different foam types and a coil base. From top to bottom, here is a full list of the materials used in this mattress:
| Layer Type | Thickness | Manufacturer’s Specs | Tested Specs |
|---|---|---|---|
| Quilted Cover | 1.75″ | Not Available | 1.56 PCF |
| Memory Foam | 0.50″ | Not Available | 1.88 PCF |
| Poly Foam | 1.00″ | Not Available | 2.84 PCF |
| Poly Foam | 1.25″ | Not Available | 1.62 PCF |
| Pocketed Coils | 9.50″ | Not Available | 15 Gauge (Center), 15 Gauge (Head/Foot), 13.5 Gauge (Edge) |

The Law Tag outlines the full breakdown of materials included in this mattress.
- Materials
- 95% polyurethane foam
- 3% polyester fiber
- 2% polypropylene fiber
- Innerspring unit
- Outer cover (top)
- 100% polyester
- Outer cover (side)
- 100% polyester
- Outer cover (bottom)
- 100% polyester
- Made by: PT. Prestova Home Living Indonesia JI. Sei Binti Komp. Latrade Industrial Park Blok E6, E7A, E8, E9, E9A, E9B, K11, K13A, K13B, K14, Tanjung Uncang, Batam
- Date of delivery: 07/22/2026
- Dimensions: 80 x 60 x 14 in.
- Net Weight of Filling Mat: 74 lbs.
- Made in Indonesia
- Manufactured by: PT. Prestova Home Living Indonesia JI. Sei Binti Komp. Latrade Industrial Park Blok E6, E7A, E8, E9, E9A, E9B, K11, K13A, K13B, K14, Tanjung Uncang, Batam
- Manufactured in: 07/2026
- Importer of Record: PT. Prestova Home Living Indonesia JI. Sei Binti Komp. Latrade Industrial Park Blok E6, E7A, E8, E9, E9A, E9B, K11, K13A, K13B, K14, Tanjung Uncang, Batam
- U.S. Location of Record: 13 Fairfield Ave. Suite 106 Little Falls, New Jersey 07424
- Model: N-2603M02117-14-Q
The Cover
The Novilla AiryFlow Graphene Hybrid has a 1.75″ diamond-stitched, quilted cover made of 100% polyester and infused with graphene fibers. This is supposed to improve cooling performance, but even with this infused material, I found the cooling to be below average.

The Comfort Layer
The comfort layer is 4.50″ thick if we include the quilted cover. Below the cover is a 0.50″ memory foam layer (blue speckled foam), followed by a 1.00″ poly foam (white speckled foam). The final material within the comfort layer is a 1.25″ poly foam (gray foam), which acts as a transitional foam above the support layer.

The Support Layer
The support layer is 9.50″ thick and made of a single 9.50″ pocketed coil support base. The coils are made from 15-gauge steel wire and individually pocketed within a thin fabric, designed to improve pressure relief and motion transfer scores.

Product Evolution
The Novilla AiryFlow Graphene Hybrid is a newer mattress to hit the market, having just launched in 2026. This is the first mattress from Novilla to include a graphene-infused cover, Euro top cushioning, phase change material, and zoned pocketed coils.
The brand is taking notable steps to improve performance while keeping the price low. To date, this is the highest-performing Novilla mattress that we have tested.
Other Mattresses to Consider
Not sure if the Novilla AiryFlow Graphene Hybrid is the right pick for you? Check out these three other top-rated hybrid mattresses for alternatives you may want to consider.
For Cooling

Chime Hybrid
Best Mattress Under $400
The Chime Hybrid is a 12″ hybrid mattress available in 1 firmness level—medium-firm. This mattress performs surprisingly well despite its extremely low price tag. For cooling, the Chime Hybrid does a much better job of limiting heat retention than what we tested on the Novilla.
For Slightly Firmer Feel

Origin Adapt Hybrid
Moderate Sinkage + Bounce
The Origin Adapt Hybrid is a 12.5″ hybrid mattress available in 1 firmness level—slightly firm. While this mattress is a little firmer than the Novilla, the overall performance is also notably higher. It scores above average for motion transfer, edge support, sex performance, off-gassing, and company policies.
For Balanced Feel

SweetNight Twilight
12″ Hybrid Design
The SweetNight Twilight is a 12″ hybrid mattress available in 1 firmness level—medium-firm. This mattress has well-rounded performance scores and a balanced feel. The overall score is slightly above the Novilla while still maintaining a price under $500 for a queen mattress.
Frequently Asked Questions
Still have questions? Check out some of the top FAQs on the Novilla AiryFlow Graphene Hybrid mattress below and get the answers you’re looking for.
How much does a Novilla AiryFlow Graphene Hybrid mattress cost?
Here are the current prices of the Novilla AiryFlow Graphene Hybrid mattress, with any sales or promotions reflected below:
Full: $430
Queen: $500
*Note: Sales prices are subject to change without notice or warning.


